Technical Articles
Selection guides, maintenance notes and application stories
Metering Pump Pulsation: Is Diaphragm Pump Flow Continuous?
Metering pump pulsation explained: why mechanical diaphragm pumps dose in pulses, what peaks do to piping and meters, and how dampeners and multi-head pumps smooth flow.
Hydraulic Diaphragm Pump vs Canned Motor Pump: Accuracy and Use
Hydraulic diaphragm pump vs canned motor pump: how each works, metering accuracy, pressure and flow range, fluid limits and upkeep, and when each sealless design fits.
Dosing Control Methods: Manual, Flow-Paced and Closed-Loop PID
Dosing control methods compared: how manual, flow-paced, closed-loop PID and feed-forward dosing work, what signal drives the pump, and how to pick one for your plant.
Dosing System Control Settings: Level Setpoints, Interlocks, Alarms
How to choose dosing system control settings: tank level alarm setpoints, pump and mixer interlocks, pressure alarms, alarm delays and 4-20 mA scaling.
Dosing System Commissioning: Water Test, Interlocks, Chemical Run
A practical dosing system commissioning checklist: water-test each pump and mixer, prove level interlocks and signals, then run on chemical and recalibrate flow.
Dosing Pump Cover: Splash Guards, Enclosures and Corrosion Control
A dosing pump cover stops chemical spray, slows corrosion from acid fumes, rain and sun, and guards moving parts. Learn the main types, materials and venting rules.
Dosing Pump Power Consumption: Motor kW, Sizing and Energy Use
Dosing pump power consumption depends on flow and discharge pressure. Learn to read motor kW, estimate hydraulic power, check real energy use and avoid undersized motors.
Dosing Pump Mixer Interlock: Level, Run Signals and Alarm Logic
How to set up a dosing pump mixer interlock: level switch points, true run feedback, batch aging timers, power restart and maintenance mode for two-tank chemical feed.
Dosing Pump Tubing Connection: Hose to PVC Pipe Without Leaks
A practical dosing pump tubing connection guide: match hose sizes to the pump head, pick a tubing to PVC pipe adapter, and stop leaks, blow-offs and siphoning.
Dosing Pump Stroke Rate: How to Set a Solenoid Pump Frequency
How to set a solenoid dosing pump stroke rate: manual spm entry, pulse multiply and divide, two-point 0-20 mA setup, a quick starting formula and the checks that follow.
245 items · Page 10 of 25