Selection Guide
Selection guides, maintenance notes and application stories
Temperature Transmitter Selection: RTD vs Thermocouple and PT100 Wiring
How to choose a temperature transmitter and sensor: RTD vs thermocouple by range, 2-, 3- and 4-wire PT100 wiring errors, head vs DIN rail mounting, and span setup.
Guided Wave Radar Level Transmitter for Storage Tanks: A Field Guide
Where a guided wave radar level transmitter works best in storage tanks, how to pick rod, rope or coax probes, and GWR installation rules that avoid false echoes.
Glycol Injection Pump Selection: MEG Hydrate Control vs TEG Dehydration
Choosing a glycol injection pump for natural gas: MEG injection for hydrate inhibition vs TEG dehydration, injection points, pressure, cold viscosity and pump type.
Fermentation Feed Pump Selection: Nutrients, pH Control, Antifoam
How to choose a fermentation feed pump for nutrient feeds, acid and base pH control and antifoam: peristaltic vs diaphragm, sterility and feed verification by weight.
Vortex vs Magnetic Flow Meter: How to Choose by Fluid and Flow
Vortex vs magnetic flow meter selection explained: conductivity limits, steam and gas service, low-flow cutoff, pressure loss and straight runs, with boiler room cases.
Automatic Sensor Cleaning: Wipers, Air Blast, Spray or Ultrasonic?
Match automatic sensor cleaning to the fouling: wipers, air blast, water or chemical spray, or ultrasonic. Covers probe types, cleaning intervals and output hold.
Oval Gear Flow Meter for Viscous Chemicals: Polymer, Antiscalant, Oil
Is an oval gear flow meter right for viscous chemicals? How the PD principle handles polymer, antiscalant and oil, plus strainers, entrained air, pulsation and jamming.
Oil in Water Analyzer Selection: Effluent and Condensate Monitoring
How to choose an oil in water analyzer: UV fluorescence vs infrared vs scattering, effluent and condensate return duty, emulsified vs dissolved oil, window fouling.
Clamp-On Ultrasonic Flow Meter: When It Fits and How to Install It
When a clamp-on ultrasonic flow meter is the right call: retrofits, large mains, pure water and flow checks. Pipe data, linings, straight runs and portable meter tips.
Resistivity Meter or Conductivity Meter: What Ultrapure Water Needs
A resistivity meter and a conductivity meter measure the same property; resistivity is the reciprocal. Ultrapure loops usually display Mohm-cm. This note compares range,.
192 items · Page 1 of 20