Zhejiang Weilan Technology Co., Ltd.

Technical Articles

Selection guides, maintenance notes and application stories

Technical Articles

Chemical Dosing Sampling Point: Where to Sample and Which Valve

Where to put each chemical dosing sampling point, from solution tank to pump discharge and downstream of injection, plus sample valve choice and safe practice.

Technical Articles

Dosing Skid Interlock List: Permissives, Alarms, Trips and Resets

How to build a dosing skid interlock list by equipment and process: what each entry needs, permissives, alarms and trips, reset rules, bypass control and testing.

Technical Articles

Chemical Dissolving Basket: What It Does in a Dosing Tank

What a chemical dissolving basket does in a dosing tank, which solid chemicals suit it, how to choose material, mesh and depth, and where to mount it safely.

Technical Articles

Dosing Skid Bill of Materials: How to Read It Line by Line

How to read a dosing skid bill of materials line by line: pumps, tanks, mixers, valves, instruments, control panel and materials, plus how to compare two quotes.

Technical Articles

Cooling Tower Cycles of Concentration: Conductivity and Dosing Control

How to control cooling tower cycles of concentration with a conductivity setpoint, size the blowdown deadband, and pace inhibitor dosing to makeup or blowdown flow.

Technical Articles

Plunger Metering Pump Control: Stroke Actuators, VFDs and Signals

How plunger metering pump control works: stroke length mechanisms, electric actuators with 4-20 mA feedback, VFD speed control, and how to combine them in a PLC loop.

Technical Articles

Metering Pump Stroke Rate and Service Life: How Speed Drives Wear

How metering pump stroke rate affects diaphragm life, check valve wear and maintenance intervals, how to count strokes per hour, and when to choose a slower pump.

Technical Articles

Metering Pump Pressure Units: Converting bar, psi, MPa and kPa

Metering pump pressure units explained: bar to psi, MPa to bar, kgf/cm² and meters of water, psig vs psia, plus worked examples and common mistakes on site.

Technical Articles

Metering Pump P&ID Symbol: Pump, Accessories and Tag Numbers

How to draw a metering pump P&ID symbol, which accessories to show, how to tag instruments under ISA 5.1, and a checklist to run before your dosing drawings go out.

Technical Articles

Metering Pump Flow Conversion: L/h, mL/min, GPH and mL per Stroke

A practical metering pump flow conversion guide: L/h to mL/min, GPH to L/h, kg/h to L/h with density, and displacement per stroke, with worked examples.

245 items · Page 9 of 25