Selection Guide
Selection guides, maintenance notes and application stories
PTFE Valve Seat and Ceramic Ball: Why This Check Valve Pair Works
A PTFE valve seat plus a ceramic ball is a common check-valve pair for metering pumps. This page covers corrosion and fouling resistance, fit, limits, and inspection.
Inductive Conductivity Sensor Selection: Strong Acid, Caustic, Scale
An inductive conductivity sensor measures mid to high conductivity without metal electrodes in the liquid. This note covers mounting, range limits and calibration.
High Temperature pH Electrode Selection: Heat, Pressure, Cooling
A high temperature pH electrode must be chosen for continuous temperature, peak temperature and pressure, not for a single 'max °C' line. This note covers when to use a.
Four-Electrode Conductivity Sensors for High Conductivity and Fouling
Four-electrode conductivity suits fouling and mid to high conductivity by splitting current and voltage electrodes. This note compares cell types, mounting and cleaning.
Fluoride pH Electrode Selection for HF and Fluoride Wastewater
pH in fluoride wastewater will etch an ordinary glass electrode if free HF is present. This note explains when to use a fluoride pH electrode or an antimony probe, how.
FKM vs EPDM Seals: How to Match the Rubber to the Chemical
FKM vs EPDM is the usual seal choice on metering pumps. This guide matches acids, alkali, hypochlorite, oil and hot water to each rubber and flags O-ring mix-ups.
Dosing System Automation: Manual, Semi-Auto or Fully Automatic
Dosing system automation starts by separating manual, semi-automatic and fully automatic duties, then matching chemical risk, dosing frequency and available.
Differential pH Electrode vs Combination Probe: Wiring and Noise
A combination probe puts glass and reference in one body. A differential pH electrode adds a third process ground electrode so ground loops and a poisoned reference are.
Acid Concentration Meter for Online Make-up and CIP Strength
An acid concentration meter estimates acid or caustic strength from a conductivity curve, not a titration. This note covers its limits and make-up pump control.
Peracetic Acid Dosing Pump: Gas Locking, Materials and Safety
How to choose a peracetic acid dosing pump: why PAA off-gassing causes gas lock, which head and seal materials hold up, and how to lay out food and medical systems.
192 items · Page 2 of 20