Zhejiang Weilan Technology Co., Ltd.

Technical Articles

Selection guides, maintenance notes and application stories

Technical Articles

Sodium Hypochlorite Dosing Pipe Return Line: Why Two Pipes?

Why a bleach pump has two pipes: the discharge line feeds the dosing point, the sodium hypochlorite dosing pipe return line carries gas and relief flow to the tank.

Technical Articles

Pulsation Dampener Sizing: Estimate Volume From Stroke Displacement

Pulsation dampener sizing for metering pumps: start from stroke displacement, apply allowed pulsation, absolute pressure and precharge, then pick the next size up.

Technical Articles

PAC Dosage for Phosphorus Removal: Estimate, Then Jar Test

How to estimate PAC dosage for phosphorus removal from orthophosphate, Al:P molar ratio and alumina content, then calibrate it with a jar test before setting the pump.

Technical Articles

NEWDOSE Metering Pump Installation: Step-by-Step Site Guide

NEWDOSE metering pump installation in the right order: pump location, suction line and foot valve, discharge, back pressure and relief valves, power, first priming.

Technical Articles

Dosing System Model Number: How to Read a Dosing Skid Code

How to read a dosing system model number: split it into series, tank or capacity, pumps and flow, materials and control, then check it against the nameplate.

Technical Articles

External vs Internal Boiler Water Treatment: Who Does What

External vs internal boiler water treatment explained: what pretreatment removes, what boiler chemical feed controls, when you need both and when pretreatment leads.

Technical Articles

How a SEKO Dosing Pump Works: Solenoid, Mechanical, Hydraulic

How a SEKO dosing pump works, explained by drive type: Tekna solenoid pumps, Kosmo and MS1 mechanical diaphragm pumps and Nexa hydraulic pumps, plus flow adjustment.

Technical Articles

SEKO Dosing Pump Spare Parts: Pump Head, Valves, Diaphragm Kit

SEKO dosing pump spare parts for Kompact and Tekna pumps: reading the model code, pump head materials, ceramic valve balls, FPM or EPDM seals and PTFE diaphragm kits.

Technical Articles

SEKO Dosing Pump Programming: Tekna Menu, Manual and Pulse Mode

SEKO dosing pump programming basics for Tekna pumps: identify AKS, AKL, APG, TPG or TPR, set the knob ranges, APG pulse ratios and DIP switches, and TPG menu modes.

Technical Articles

SEKO Dosing Pump Installation: Injection Valve, Foot Valve, Layout

SEKO dosing pump installation for Tekna pumps: pump location, foot valve and suction line, where the injection valve goes, and when to add a back-pressure valve.

245 items · Page 7 of 25