Zhejiang Weilan Technology Co., Ltd.

FAQ

Selection guides, maintenance notes and application stories

FAQ

Hydraulic Diaphragm Pump Lifespan: Service Life and Overhaul

Hydraulic diaphragm pump lifespan explained by part: diaphragm, valves, oil and drive, what shortens it, when to plan an overhaul and how to make the pump last.

FAQ

Dosing Pump Not Starting? What to Check When It Has Power

A dosing pump not starting is often not broken. Check power, stop and external signals, panel settings and alarm codes in order, using the IWAKI EHN as the example.

FAQ

Dosing Pump Return Line Blocked: Causes and How to Clear It

A blocked return line stops the bleed valve venting and leaves relief flow nowhere to go. See the symptoms, causes, safe clearing steps and layout rules that prevent it.

FAQ

Solenoid Dosing Pump Overheating: Normal Heat or a Real Fault?

Some coil heat is normal; a burning smell is not. Find the cause of solenoid dosing pump overheating: stroke rate, back pressure, voltage and installation.

FAQ

Hydraulic Diaphragm Pump Oil Contamination: Causes and Fixes

Oil in your dosed chemical? Hydraulic diaphragm pump oil contamination usually means a ruptured diaphragm. How to confirm it, respond, clean up and prevent it.

FAQ

Metering Pump Keeps Tripping? Overload, Phase Loss and Interlocks

Metering pump keeps tripping? Check overload relay settings, phase loss, motor insulation, VFD faults and level, pressure and flow interlocks before you reset again.

FAQ

Metering Pump Pressure Fluctuation: Valves, Dampers and Piping

Gauge needle swinging and pipes shaking? Find the cause of metering pump pressure fluctuation: check valves, back pressure valve, damper, suction and piping layout.

FAQ

Dosing Pump Frequency Setting: What the F on the Display Means

Dosing pump frequency setting explained: what F, A, H and P mean on a solenoid pump display, how spm works, and how to turn the number into real flow.

FAQ

How to Prime a Metering Pump on First Start-Up (Step by Step)

How to prime a metering pump on first start-up: why trapped air stops a diaphragm pump, pre-start checks, bleed valve and no-bleed methods, and calibration.

FAQ

Dosing Pump Diaphragm Failure: Is It Covered by Warranty?

Is a dosing pump diaphragm failure covered by warranty? How to tell wear from a defect, what evidence to keep before a claim and how to order the right replacement kit.

84 items · Page 3 of 9