Zhejiang Weilan Technology Co., Ltd.

Technical Articles

Selection guides, maintenance notes and application stories

Technical Articles

Doseuro Pump Wiring: Star/Delta Motor, 4-20mA Actuator and VFD

Doseuro pump wiring explained: reading the motor nameplate for star or delta, 4-20mA and pneumatic stroke actuators, RAPIDA 2.0 inverter signals and ATEX notes.

Technical Articles

Doseuro Metering Pump Adjustment: Stroke Length and Speed Control

Doseuro metering pump adjustment explained: manual stroke knob, 4-20 mA or pneumatic actuators, RAPIDA 2.0 speed control, and how to verify flow with a calibration pot.

Technical Articles

Cheonsei Metering Pump Adjustment: Stroke Dial, Speed and Calibration

Cheonsei metering pump adjustment on KD pumps: setting the stroke dial and vernier, why 50 Hz vs 60 Hz changes SPM, and when the BLDC option adds 4-20mA control.

Technical Articles

Urea Dosing Rate for SCR and SNCR: How to Size the Pump

Work out the urea dosing rate from flue gas flow, inlet NOx, removal efficiency and NSR, convert it to solution flow in L/h, then size the metering pump with margin.

Technical Articles

NEWDOSE Metering Pump Wiring: DP Pulse and DM 4-20mA Inputs

NEWDOSE metering pump wiring for DP pulse and DM 0/4-20mA models: power supply, dry-contact remote stop, pulse voltage limit, polarity and the four DM set points.

Technical Articles

Dosing Skid Inspection: Factory and Site Acceptance Checklist

A practical dosing skid inspection guide covering factory acceptance and site acceptance: documents, materials, welds, wiring, interlocks, water tests and punch lists.

Technical Articles

Dosing Pump Mounting: Platform Height, Vibration and Pipe Support

Dosing pump mounting guide: set platform height, choose frame material, level and bolt the pump, control vibration and support pipes so the pump head carries no load.

Technical Articles

Dosing Line Pressure Test: Flushing, Hydrotest and Leak Checks

A dosing line pressure test done in the right order: flush first, isolate the pump and dampener, pressurize in stages, find leaks, then run the pump on water.

Technical Articles

Dosing System Isolation Valve: Where to Fit It and How to Choose

What a dosing system isolation valve does, where it goes around the metering pump, why it must sit downstream of the relief valve, and how to pick body and seals.

Technical Articles

Cheonsei Metering Pump Wiring: Motor, 4-20mA and Level Switch

Cheonsei metering pump wiring for KD pumps: delta or star motor connection, the 4-20mA input and feedback on BLDC units, and how to interlock a low level switch.

245 items · Page 13 of 25