New Dose DP (Pulse), DM (4-20mA) & DC (RS485) Metering Pumps Compared
Beyond the manual DFD series, New Dose offers three dedicated automated solenoid models: DP, DM, and DC. Based on our DP, DM, and DC listings, here is how each matches your control loop.
1. Control Modes Compared
- New Dose DP (Pulse): Accepts water-meter pulses with built-in frequency multiplication and division plus level-switch interlock for flow-paced dosing.
- New Dose DM (0/4-20 mA): Accepts
0/4–20 mAsignals directly from pH/ORP/chlorine analyzers with selectable forward or reverse proportional curves. - New Dose DC (RS485): Connects to HMIs, PLCs, or SCADA over RS485, managing up to 128 pumps from a single screen.
2. Wiring and Priming Tips
Use shielded twisted-pair cable separated from 220 V power lines, assign unique Slave IDs on RS485 buses, bleed trapped air at 100% speed before commissioning, and add a discharge backpressure valve to prevent siphoning.
Conclusion
Pick DP for water-meter pulses, DM for direct 4–20 mA analyzer loops, and DC for multi-pump RS485 networks. Contact our team for wiring diagrams or Modbus register maps.
FAQ
What is forward vs. reverse proportional control on the DM series?
It lets one pump increase dosing as mA rises (e.g., acid feed) or increase dosing as mA drops (e.g., caustic neutralization).
How does DP handle fast or slow water-meter pulses?
Built-in pulse division (1 stroke per N pulses) and multiplication (N strokes per pulse) match any meter factor.
How many DC pumps can share one control screen?
Up to 128 DC pumps can be centralized on a single compatible HMI screen over RS485.
Do DP, DM, and DC include low-level tank protection?
Yes, all three include a tank float-switch interlock input.
Do you supply New Dose signal connectors and spare diaphragms?
Yes. Weilan stocks New Dose DP, DM, DC, DFD, and Evodose pumps plus OEM spare kits.