Milton Roy G Series (GM/GB) Mechanical Diaphragm Pump: 1,800 L/h, 12 bar & 60°C Rating
The Milton Roy G Series (GM and GB) mechanical diaphragm metering pumps are workhorses across municipal water plants, power boilers, and chemical skids. Based on the latest 2026 Chinese datasheet on our Milton Roy G Series page, here are the verified limits and maintenance rules.
1. Updated Core Specifications
Single-head flow reaches 1,800 L/h at discharge pressures up to 12 bar (1.2 MPa) with a 10:1 turndown and ±1% steady-state accuracy. Notably, maximum allowable liquid temperature in the 2026 specification is 60 °C (up from 50 °C in the 2024 edition), provided the chosen wetted head (PVDF or 316SS) matches that temperature. GM covers lower-to-medium flows (≤500 L/h), while GB handles heavier 500–1,800 L/h duties.
2. Three Rules for Long Diaphragm Life
Install a discharge safety relief valve set below 12 bar, zero the stroke dial to 0% before installing a new PTFE diaphragm, and replace gearbox oil after the first 500 hours and every 3,000 to 4,000 hours thereafter.
Conclusion
Verifying the 1,800 L/h, 12 bar, and 60 °C limits of the Milton Roy G Series prevents undersizing on warm chemical lines. Contact our team for curves or OEM spare kits.
FAQ
Are GM and GB diaphragms or check valves interchangeable?
No. GM and GB use different frame sizes and liquid-end dimensions—always order by exact nameplate code.
Why did older datasheets list 50 °C instead of 60 °C?
Milton Roy updated the G Series maximum fluid temperature rating from 50 °C (2024) to 60 °C (2026); still verify head material temperature limits (PVC vs PVDF/316SS).
Can GM/GB pumps be controlled by 4-20 mA signals?
Yes, via an optional VFD motor + inverter or electric stroke actuator.
Is the G Series suitable for sodium hypochlorite?
Yes, especially with flooded suction, short suction lines, and a discharge backpressure valve.
Do you stock Milton Roy GM/GB pumps and OEM diaphragms?
Yes. Weilan stocks complete GM/GB units and genuine PTFE diaphragms and valve kits.