Technical Articles
Selection guides, maintenance notes and application stories
Hydraulic vs Mechanical Diaphragm Pump: Structure, Pressure Limits and Upkeep
Hydraulic vs mechanical diaphragm pump explained from the inside: how each diaphragm is loaded, what the refill and relief valves do, where pressure tops out, how accuracy behaves and what maintenance really involves.
API 675 Hydraulic Diaphragm Metering Pump Standard & Sizing
Engineering guide to the API 675 hydraulic diaphragm metering pump standard: understanding ±1% steady-state accuracy, ±3% linearity, internal three-valve oil protection, double-diaphragm rupture detection, and high-pressure derating rules.
Jar Test Floc Evaluation: How to Judge PAC and PAM Flocculation by Floc and Effluent
A practical jar test floc evaluation guide: how fast floc forms, how big and dense it gets, how quickly it settles and how clear the supernatant is, plus what to check in the flocculation basin, clarifier and effluent before you adjust PAC or PAM.
PAC Dosage Calculation: From Jar Test Dose to Metering Pump Flow
PAC dosage calculation takes three steps: plant flow times dose gives chemical mass per hour, solution strength turns that into liters per hour, and a margin gives pump size. A worked example with hypothetical numbers, plus product vs active basis and peak flow pitfalls.
Metering Pump Specifications Explained: Flow, Pressure and Material Codes
How to read metering pump specifications on a datasheet or nameplate: rated flow, maximum pressure, stroke rate, stroke length, motor data and wetted material codes, the test conditions behind each number, and the misreadings that lead to the wrong pump.
Metering Pump Flow Calculation: Formulas From Dose Rate to Pump Size
A practical metering pump flow calculation in two steps: convert water flow and dose into liters per hour of chemical, then match it to stroke volume, stroke rate and stroke length. Worked with clearly assumed numbers, plus sizing margin and common unit errors.
Stroke Length Adjustment in Diaphragm Metering Pumps: How the Mechanism Works
How stroke length adjustment works in a mechanical diaphragm metering pump: lost-motion limit rods versus variable eccentric drives, why stroke length sets displacement per stroke, why low settings drift, and when to choose manual or electric stroke control.
Metering Pump Calibration Column vs Stroke Dial and Flow Meter: Where to Read Real Flow
The stroke dial shows a setting, not a flow. Learn how a metering pump calibration column, stroke and speed displays, inline flow meters and tank level each tell you something different, which one to trust, and why the readings disagree.
Metering Pump Check Valve Structure: Balls, Seats, Guides and Seals Explained
How a metering pump check valve is built: ball, seat, guide and seals, the materials used for each, single versus double ball and spring-loaded designs, and how to trace leaks, stuck balls and falling flow to the right part.
Sodium Hypochlorite Dosing Pump: How Hypochlorite Feed Works and Why It Vapor Locks
A sodium hypochlorite dosing pump feeds available chlorine in proportion to flow, and residual chlorine shows whether the dose is right. The hard part is the chemical itself: hypochlorite keeps decomposing and releasing gas, which collects in the pump head and stops delivery. Here is why, and how to design around it.
245 items · Page 17 of 25