Zhejiang Weilan Technology Co., Ltd.

Technical Articles

Selection guides, maintenance notes and application stories

Technical Articles

Hydraulic Diaphragm Pump Parts: Inside a Milton Roy Refill and Relief System

A walk through hydraulic diaphragm pump parts on Milton Roy Milroyal B, mRoy and Primeroyal units: drive end, plunger and oil chamber, MARS automatic refill, built-in relief and vent valve, PTFE diaphragm and check valves, plus what to inspect first.

Technical Articles

Pressure Relief Valve Setting for Dosing Pumps: Steps and Set Point Logic

How to choose and adjust the pressure relief valve setting on a chemical dosing system: set point logic between working pressure and the weakest rated component, a step-by-step field procedure, and fixes for weeping or failure to open.

Technical Articles

Solenoid vs Motor Driven Metering Pump: How the Drive Sets Flow, Pulsation and Control

Solenoid vs motor driven metering pump explained from the drive side: pulsed coil versus motor, gearbox and eccentric. See how that one difference changes flow range, pulsation, control signals, noise and wear parts, and which pump fits your duty.

Technical Articles

Sodium Hypochlorite Dosing Calculation: From Chlorine Dose to Pump Flow

A practical sodium hypochlorite dosing calculation: convert the chlorine dose into grams per hour, work out available chlorine per liter of solution, and size the metering pump with margin for dilution and strength loss.

Technical Articles

PTFE Diaphragm Metering Pump: Composite Material and Service Life

How a PTFE diaphragm metering pump combines chemical resistance with flex life: inside the PTFE-elastomer-metal composite diaphragm structure, what media it handles, what shortens diaphragm life on site, and how to prevent premature rupture.

Technical Articles

Polymer Make-Up System Design: Concentration, Aging Time and Tank Sizing

A practical guide to polymer make-up system design for wastewater and sludge dewatering: how to size mixing, aging and storage chambers, pick solution strength, set mixer speeds, prevent powder caking and match metering pumps.

Technical Articles

Polymer Dosing Calculation: From Jar Test Dose to Pump Flow

A practical polymer dosing calculation for flocculation and sludge dewatering: convert ppm or kg per dry ton into polymer mass per hour, then into solution flow at your make-down concentration, then into metering pump size. Worked examples use assumed numbers only.

Technical Articles

PAC Dosing System Components: Tanks, Mixers, Pumps and Controls

What are the core PAC dosing system components on an automatic coagulant skid? This guide breaks down the solution tanks, mixers, level sensors, metering pumps, piping accessories and PLC cabinet so buyers and engineers can verify every part on a quote.

Technical Articles

Milton Roy Pump Flow Adjustment: Stroke Knob, Speed and Calibration

Milton Roy pump flow adjustment depends on the pump family: G Series mechanical diaphragm pumps use a stroke knob, LMI solenoid pumps combine stroke and speed knobs, and Smart Digital models take a flow setpoint. Steps, checks and common mistakes.

Technical Articles

4-20mA Controlled Metering Pump PLC Integration: Comparing Analog, Pulse and RS485 Modbus Dosing

Designing an automated chemical feed loop? Master 4-20mA controlled metering pump PLC integration, compare analog current loops with pulse pacing and RS485 Modbus RTU, and evaluate electric stroke actuators versus VFD speed control on mechanical diaphragm pumps.

245 items · Page 16 of 25