Zhejiang Weilan Technology Co., Ltd.

FAQ

Selection guides, maintenance notes and application stories

FAQ

Chemical Dosing Equipment: What Category It Falls Under, Types and Components

Chemical dosing equipment is water treatment process equipment, not just a pump. See how it is classified by automation level, construction, chemical and application, and which components to check when you specify or receive a package.

FAQ

Hypochlorite Storage Safety: Does a Dosing Room Need Explosion-Proof Equipment?

Hypochlorite storage safety explained for plant designers and operators: why bleach rooms rarely need explosion-proof motors, and how to handle chlorine gas risk, ventilation, bunding, corrosion and pump interlocks.

FAQ

Sodium Hypochlorite Dosage for Drinking Water, Reuse Water and Wastewater

How to set sodium hypochlorite dosage: chlorine demand plus target residual. Typical ranges for drinking water, reuse water and wastewater, a demand test method, and how to convert dose to pump flow.

FAQ

Polymer Dosage: Typical Ranges for Flocculation vs Sludge Dewatering

Polymer dosage is measured two ways: mg/L for clarification and kg per tonne of dry solids for sludge dewatering. Learn typical ranges, jar and press trials, solution strength and pump sizing.

FAQ

Coagulant Overdose: Signs of Too Much PAC or Polymer in Your Basins

How to spot coagulant overdose on site: fine white floc, rising settled turbidity, falling pH, sticky floating polymer floc and fast filter headloss, plus a step-by-step way to confirm and correct the dose.

FAQ

Boiler Water Treatment Chemicals: What Phosphate, Ammonia and Hydrazine Do

A plain guide to boiler water treatment chemicals: phosphate for scale control in the drum, ammonia for feedwater pH, hydrazine and other oxygen scavengers for dissolved oxygen, and what each means for the dosing pump.

FAQ

Boiler Chemical Feed: Continuous vs Intermittent (Slug) Dosing

Should boiler chemical feed be continuous or intermittent? Oxygen scavenger, amine and most drum phosphate feeds run continuously, while small low-pressure boilers can be slug fed. Learn how each method affects residuals, pump sizing, blowdown and common mistakes.

FAQ

PAC Dosage: How to Find the Right Range for Your Water

There is no universal PAC dosage. Turbidity, temperature, pH, organics and product strength all shift it. How to run a jar test, set test steps, convert the result to pump flow and spot underdosing or overdosing.

FAQ

Metering Pump Suction Lift: How High Above the Liquid Can a Diaphragm Pump Sit?

Metering pump suction lift is set by the manual, measured from the lowest tank level, and shrinks with viscous or gassy chemicals. Learn when to switch to flooded suction and what to add once you do.

FAQ

Solenoid Metering Pump Flow Adjustment with Stroke and Frequency

Solenoid metering pump flow adjustment works when stroke sits in the recommended band and frequency tracks demand. Learn the regulating idea, external signal pitfalls, and why tiny stroke settings ruin linearity.

84 items · Page 6 of 9