Jiangsu Boyu Metering Pumps: DJZ Diaphragm, DZ-X Plunger & DYZ Hydraulic
Jiangsu Boyu metering pumps are common on packaged water treatment skids because of their IP55 enclosures and 4-20 mA automation options. Based on our Boyu DJZ, DZ-X, and DYZ pages, here is how to pick between the three lines.
1. Three Core Series
- Boyu DJZ (Mechanical Diaphragm) runs from 0 to 500 L/h and 0 to 1.0 MPa with an IP55 housing. It supports manual stroke dials as well as 4-20 mA automated flow control.
- Boyu DZ-X (Plunger) handles clean, particle-free chemicals and boiler feeds at higher pressures.
- Boyu DYZ (Hydraulic Diaphragm) adds a leak-free hydraulic diaphragm for pressures above 1.0 MPa.
2. Commissioning and Care
Keep suction lines short with foot strainers 5 to 10 cm above the tank bottom, and install safety relief and backpressure valves on the discharge line. Change gearbox oil after the first 500 hours. Even with an IP55 rating, put a simple rain and sun hood over outdoor pumps.
Conclusion
Boyu DJZ, DYZ, and DZ-X cover low to high pressure industrial dosing. Contact our team for sizing tables and quotes.
FAQ
Does Boyu DJZ support 4-20 mA control?
Yes, either with an optional electric stroke actuator or an inverter-duty motor paired with a VFD.
Should I choose DJZ or DYZ for sodium hypochlorite?
Use DJZ up to 1.0 MPa, and switch to the DYZ hydraulic diaphragm model if discharge pressure exceeds 1.0 MPa.
Can IP55 pumps run outdoors uncovered?
IP55 protects against dust and water jets, but a basic weather hood still extends seal and electronics life outdoors.
What should I check before restarting a DZ-X plunger pump after long storage?
Inspect the plunger for scale, turn the shaft by hand to verify free movement, and lubricate the packing before starting under pressure.
Do you supply genuine Boyu spare parts?
Yes. Weilan supplies complete Boyu pumps along with OEM diaphragms, valves, and seals.