Suntex PC-350 vs PC-110 pH/ORP Transmitters: Specs & Calibration
Alongside its flagship intelligent analyzers, Suntex offers the economical PC-350 and compact PC-110 pH/ORP transmitters for OEM water skids and compact panels. Based on our Suntex PC-350 and PC-110 listings, here is how they compare.
1. PC-350 vs. PC-110
- Suntex PC-350: Standard industrial pH/ORP controller with isolated
4–20 mAoutput and Hi/Lo relay contacts for direct dosing pump control. - Suntex PC-110: Compact microcomputer transmitter (
96 × 48 mmstyle) ideal when panel space is tight.
2. Two-Point Calibration & Installation
Rinse the sensor with DI water, blot dry, calibrate zero at pH 7.00, then calibrate slope at pH 4.01 or 10.01. Always verify panel cutout dimensions before ordering replacements and keep BNC connectors dry and away from AC power lines.
Conclusion
Both Suntex PC-350 and PC-110 offer dependable pH/ORP monitoring for budget-conscious skids. Contact our team for manuals and compatible electrodes.
FAQ
How do I choose between PC-350 and PC-3110?
Choose PC-350 for straightforward monitoring and relay/4–20 mA control; upgrade to PC-3110 for advanced diagnostics and wash relays.
What if calibration fails with a low-slope error?
Clean the glass bulb and reference junction, retest with fresh buffers, or replace the aged sensor.
Can pH sensor cables run alongside 220 V pump cables?
No—route high-impedance pH leads separately from AC power and VFD wiring.
Does ORP require two-point calibration?
No, ORP typically uses a single-point check against a standard ORP solution (e.g., 256 mV).
Do you supply Suntex electrodes and holders?
Yes, Weilan supplies all Suntex transmitters, pH/ORP electrodes, and inline/submersion holders.