Zhejiang Weilan Technology Co., Ltd.

Dosing Pump Accessories: Relief Valve, Backpressure Valve & Pulsation Dampener Guide

Author: Zhejiang Weilan Technology Co., Ltd.Source: Official sitePublished: Category: Tech Articles
Summary: How safety relief valves, backpressure valves, and pulsation dampeners work on metering pump discharge lines, exact installation sequence, and pressure settings.

Even the best metering pump suffers from siphoning, erratic flow, or overpressure damage without proper discharge accessories. This guide explains the roles, exact piping order, and pressure settings for safety relief valves, pulsation dampeners, and backpressure valves.

1. What Each Accessory Does

  • Safety Relief Valve (PSV): Protects pump and piping against dead-heading by venting back to the tank if discharge pressure spikes.
  • Backpressure Valve: Creates steady artificial backpressure (0.15–0.3 MPa) to eliminate siphoning and improve check-valve repeatability.
  • Pulsation Dampener: Absorbs reciprocating pressure spikes, prevents pipe water hammer, and smooths flow for downstream meters.

2. Correct Piping Order

Following flow from the pump discharge:

Pump Discharge → 1. Safety Relief Valve (to tank) → 2. Pulsation Dampener → 3. Backpressure Valve → Pressure Gauge → Injection Quill

Never place an isolation valve between the pump head and the safety relief valve.

3. Pressure Settings

Set the relief valve at 1.1–1.2× operating pressure (below pump max rating), set the backpressure valve around 0.15–0.3 MPa, and pre-charge bladder dampeners with dry nitrogen to 70%–80% of system operating pressure.

Conclusion

Installing a relief valve, dampener, and backpressure valve in the right sequence eliminates siphoning and protects your pump investment. Browse our system accessories or contact our team.

FAQ

When is a backpressure valve mandatory?

Whenever system pressure is below 0.1 MPa, the injection point sits below tank level (siphon risk), or high dosing repeatability is required.

Should dampeners be charged with nitrogen or shop air?

Use dry nitrogen (N₂) to preserve elastomer bladder life and avoid moisture or oxidation issues.

Can a backpressure valve replace an injection check valve?

No—always keep a dedicated injection check valve at the process pipe entry to prevent process backflow.

Should the relief valve return to the suction line or the tank?

Always pipe relief return back to the atmospheric chemical tank top so any lift is visibly obvious.

Do you stock PVC, PVDF, and 316L valves and dampeners?

Yes, Weilan supplies relief valves, backpressure valves, and dampeners in PVC, PVDF, PTFE, and 316L.

Get a Quote

Leave your requirements and we will reply within 1 business day

Inquire Now →