Zhejiang Weilan Technology Co., Ltd.

KEMPION KD & KDV-A Metering Pump: Internal Structure, 4-20mA Wiring & Faults

Author: Zhejiang Weilan Technology Co., Ltd.Source: Official sitePublished: Category: Tech Articles
Summary: Inside the Korean KEMPION (Cheon-Sei) KD and KDV-A metering pumps: gearbox/liquid-end structure, PTC/FTC/STS wetted codes, 4-20mA BLDC wiring, and fault troubleshooting.

Korean KEMPION (Cheon-Sei) metering pumps are widely installed in semiconductor wet benches, PCB etching, plating, and water treatment skids. Technicians frequently look up the internal structure, wetted material codes, and KDV-A 4-20 mA wiring. Based on our KD series and KDV-A specs, here is a practical breakdown.

1. Internal Structure & Wetted Material Codes

A KEMPION metering pump consists of two main assemblies:

  1. Drive End: Oil-bath lubricated worm-gear reducer and eccentric cam mechanism, available in vertical (V) or horizontal (H) motor mounts.
  2. Liquid End: Pump head, PTFE-faced composite diaphragm, and double-ball check valves coded by wetted material: PTC (PVC + PTFE + Ceramic), FTC (PVDF + PTFE), and STS / 6T6 (SS304 / SS316L).

2. KD Manual vs. KDV-A 4-20 mA Control

  • KD Series: Covers 20–45,000 mL/min up to 10 bar, manually adjusted via stroke knob (20%–100%).
  • KDV-A Series: Adds a BLDC brushless motor + microprocessor for 5%–100% speed turndown at ±2% accuracy with 4–20 mA input and isolated feedback output.

KDV-A Wiring & Setup

Wire the PLC/analyzer 4–20 mA loop to IN+ / IN-, switch the controller to AUTO, and lock the mechanical stroke knob at 100% so the BLDC drive handles full speed modulation.

3. Common Faults & Troubleshooting

  • BLDC Overcurrent / Overload: Check for closed discharge valves exceeding 10 bar or blocked motor cooling fans.
  • Check-Valve Leakage: Clean crystallized deposits from seats and verify upward flow arrows.
  • Weep-Hole Leakage: Indicates diaphragm perforation—shut down immediately and replace the diaphragm and gearbox oil if contaminated.

Conclusion

Understanding KEMPION material codes and KDV-A BLDC control keeps chemical dosing reliable. For spare diaphragms or selection help, contact our engineering team.

FAQ

What do V and H mean in KEMPION model numbers?

V stands for Vertical motor mounting (compact skid footprint) and H stands for Horizontal motor mounting.

Where should the stroke knob sit when using 4-20 mA on KDV-A?

Keep the mechanical stroke knob at 100% and let the BLDC speed controller modulate flow across 5%–100%.

How do I choose between PTC and FTC liquid ends?

Use PTC (PVC) for ambient-temperature acids, caustics, and hypochlorite; upgrade to FTC (PVDF) for higher temperatures or stronger oxidizers.

Why does gearbox oil turn milky white?

Moisture ingress or a pinhole diaphragm leak emulsified the oil—replace the diaphragm and flush the gearbox oil immediately.

Can KEMPION KD pumps handle thick lime slurry?

Standard ball check valves work best on clean or low-solids chemicals; heavy slurries should use a hose/peristaltic or progressive cavity pump.

Get a Quote

Leave your requirements and we will reply within 1 business day

Inquire Now →