Shanghai Shenbei Metering Pumps: SJM Mechanical vs SJ-M Hydraulic & SJ Plunger
Shanghai Shenbei builds metering pumps to GB/T 7782-2008, and its models show up often on municipal wastewater and industrial chemical skids. Based on our Shenbei SJM, SJ-M, and SJ pages, here is how the three series differ.
1. Three Core Series
- Shenbei SJM (Mechanical Diaphragm) covers 4 to 3,898 L/h up to 0.8 MPa (8 bar) with accuracy within ±2%. It has no dynamic packing seal, so it suits routine water treatment dosing on a budget.
- Shenbei SJ-M (Hydraulic Diaphragm) uses a hydraulically balanced PTFE diaphragm with an internal relief valve for higher backpressures and hazardous chemicals.
- Shenbei SJ (Plunger) uses a packed plunger for clean, particle-free liquids at high pressure.
2. Selection and Maintenance Rules
Use SJM up to 0.8 MPa. Step up to SJ-M if system pressure goes higher or if the chemical cannot leak, and pick SJ only for clean high-pressure feeds. Change the gearbox oil after the first 500 hours, and keep the stroke setting between 30% and 100% during normal operation.
Conclusion
Match Shenbei SJM, SJ-M, and SJ to your discharge pressure and leakage limits before ordering. Contact our team if you need datasheets or OEM spare parts.
FAQ
Is the Shenbei SJM limited to 0.8 MPa?
Yes. SJM is rated up to 0.8 MPa (8 bar). Use the SJ-M hydraulic or SJ plunger series for higher pressures.
Do I need a backpressure valve when dosing into an open tank?
Yes. A backpressure valve stops siphoning when the pump shuts off and helps the check valves seat consistently.
Should stroke adjustment be done while running?
Yes. Turn the stroke knob slowly while the pump is running so you do not strain the eccentric mechanism.
Can you supply Shenbei replacement diaphragms and valves?
Yes. Send us the nameplate code and wetted material so we can match the OEM diaphragm and check-valve kits.
How does Shenbei SJM compare with Boyu DJZ?
SJM extends up to 3,898 L/h at 0.8 MPa, whereas Boyu DJZ covers 0 to 500 L/h up to 1.0 MPa.