Zhejiang Weilan Technology Co., Ltd.

Selection Guide

Selection guides, maintenance notes and application stories

Selection Guide

Wastewater Dosing Pump Redundancy: Duty/Standby, N+1 and Flow Margin

How many wastewater dosing pumps does each injection point need? A practical guide to duty/standby and N+1 layouts, sensible flow margin, standby piping, automatic changeover and keeping the spare pump ready to run.

Selection Guide

Chemical Dosing Skid: Structure, Advantages and When Not to Use One

A chemical dosing skid puts metering pumps, tank, valves, instruments and the control panel on one steel base, built and tested in the factory. See how a skid is laid out, why it beats site assembly, where it falls short, and what to define first.

Selection Guide

Packaged Dosing System vs a Single Metering Pump: What the Package Actually Does

What a packaged dosing system does that a single metering pump cannot: solution make-up, accurate injection, protection against dry running, siphoning and overpressure, and control. Learn when a pump alone is enough and what to check on a quote.

Selection Guide

Wastewater Treatment Chemicals: Coagulants, Polymers, Carbon Sources and Disinfectants

Which wastewater treatment chemicals does your plant need? Match coagulants, polymers, pH chemicals, carbon sources and disinfectants to the pollutant, then check pump materials.

Selection Guide

Sodium Hypochlorite Dosing Line: Pipe Material, UV Aging and Crystal Build-Up

Choosing a sodium hypochlorite dosing line: when PVC-U is enough, when to move to CPVC or PVDF, why stainless steel and clear braided hose fail, and how to stop UV aging, crystals and trapped-gas pressure.

Selection Guide

PAC Dosing Line Material: UPVC, PE or Stainless Steel?

For a PAC dosing line, UPVC is the usual first choice and PE suits long or buried runs, while carbon steel and 304 stainless are poor choices. How concentration, temperature and crystallisation affect material and layout.

Selection Guide

Stroke Actuator for Metering Pumps: How Electric Stroke Control Works

A stroke actuator replaces the manual handwheel on a mechanical diaphragm pump and sets stroke length from a keypad or 4-20 mA signal. How it works, how it differs from a VFD, and when it is worth specifying.

Selection Guide

Which Metering Pump Brand Is Best? How to Pair Brands for Every Budget

Which metering pump brand is best? None wins every duty. Here is how to mix Chinese and imported pumps on a tight, mid-range or generous budget, point by point.

Selection Guide

Which Dosing Pump Brand Is Best for Small-Flow Chemical Feed?

Which dosing pump brand fits small-flow feed? Skip rankings. Match flow, pressure, materials and controls, then compare durability and service for cooling towers, boilers and compact wastewater plants.

Selection Guide

Solenoid Dosing Pump Brands Compared: Control Options, IP Rating and Support

Comparing solenoid dosing pump brands? Check control signals, IP rating versus install site and spares support across LMI, SEKO, IWAKI, Doseuro and NEWDOSE.

192 items · Page 14 of 20