IWAKI LK & LK-F Motor-Driven Metering Pumps: 45/54 L/min Heavy-Duty Specs
When dosing requirements exceed solenoid limits into dozens of liters per minute, the Japanese IWAKI LK and LK-F motor-driven diaphragm metering pumps step in. Based on our IWAKI LK/LK-F and IWAKI IX pages, here are the key ratings and piping rules.
1. Flow, Pressure, and Material Limits
At 50/60 Hz, maximum output reaches 45 L/min (2,700 L/h) and 54 L/min (3,240 L/h). Pressure limits depend on wetted material: PVC and PVDF heads rate to 1.0 MPa (10 bar), while SUS316 stainless heads extend to 1.5 MPa (15 bar). LK serves general industrial dosing, whereas LK-F targets food and hygienic transfer requiring easier washdown.
2. Large-Flow Piping and Maintenance
Do not undersize suction lines at 45 to 54 L/min—use flooded suction to avoid cavitation. Always install a discharge safety relief valve and nitrogen-charged pulsation dampener to protect downstream piping, and change gearbox oil after the first 500 hours and every 3,000 to 4,000 hours thereafter.
Conclusion
IWAKI LK and LK-F bring 45/54 L/min industrial durability up to 1.5 MPa. Contact our team for datasheets or OEM spare kits.
FAQ
Should I choose IWAKI IX or LK?
Use IX up to 300 L/h for high-turndown digital control; choose LK/LK-F for large flows from 500 up to 3,240 L/h.
Do PVC and PVDF heads share the same pressure rating on LK?
Yes, both rate up to 1.0 MPa, though PVDF handles higher temperatures and stronger oxidizers.
Is a pulsation dampener necessary on LK pumps?
Yes—at 45 to 54 L/min, a properly sized dampener prevents pipe hammer and protects downstream meters.
Can stroke be adjusted while running?
Yes, adjust smoothly during operation within the recommended 25% to 100% range.
Do you supply genuine IWAKI LK spare diaphragms?
Yes. Weilan supplies LK, IX, ES, EJ, and EHN pumps along with OEM diaphragms and valve kits.