Grundfos DME Large-Flow Digital Dosing Pumps (60–940 L/h): Selection & Setup
When dosing rates climb above 30 L/h, Grundfos DME extends SMART Digital control up to 940 L/h. Based on our Grundfos DME and DDA listings, this guide covers selection and suction piping setup.
1. Key Capabilities of Grundfos DME
Grundfos DME covers 60 to 940 L/h (including DME 60-10, 150-4, 375-10, and 940-4) with a 1:800 turndown ratio. Because the stepper or brushless drive always runs a full 100% suction stroke and adjusts discharge speed instead, it avoids the gas-locking problems common on short-stroke mechanical pumps. Control modes include direct L/h entry, pulse, 4-20 mA, batch, and slow-suction for viscous polymers.
2. Piping and Commissioning Rules
Do not undersize suction piping on 375 to 940 L/h models. Use flooded suction whenever possible to prevent cavitation, and install safety relief and backpressure valves on the discharge line.
Conclusion
Grundfos DME brings 1:800 digital control to high-capacity dosing lines without mechanical stroke linkages. Contact our team for datasheets and OEM spare kits.
FAQ
What do the numbers in DME 375-10 mean?
375 is the maximum flow in L/h, and 10 is the maximum rated backpressure in bar.
How does DME compare to DDA?
DDA covers 0.0025 to 30 L/h with a 1:3000 turndown and FlowControl diagnostics. DME covers 60 to 940 L/h with a 1:800 turndown.
Why use flooded suction on large DME pumps?
High instantaneous suction velocity can cavitate long or narrow suction lines, so positive inlet head keeps the pump chamber full.
Does DME support Profibus or Modbus?
Yes, optional fieldbus modules are available on select DME control variants.
Do you stock Grundfos DME pumps and diaphragm kits?
Yes. Weilan supplies complete DME units and genuine Grundfos service kits.